Email: Info@AAGraphics.net

Need help? Contact Us! 713-686-0502

Graphtec FC8600 Cutter

Graphtec FC8600 Cutter

FC8600 Series high-performance roll feed cutting plotter is an industry leader for sign makers, graphic artists, automotive aftermarket professionals, countertop installers and other related users. Graphtec FC8600 vinyl cutter sets an industry standard for quality and durability, and is now an even more powerful tool for any professional in the search of the highest-quality and most technically-advanced cutter on the market. Graphtec's sophisticated and proprietary technology, the Tangential Control mode, allows for complete elimination of distorted, rounded, or lifted corners, even when highly intricate design cutting is required. This innovative features allows the Graphtec FC8600 to cut small text strings on vinyl.

The FC8600 series is the flagship model of Graphtec America. Known around the world for its high precision cutting, and build quality, the FC8600 is the ultimate finishing solution for the signage, apparel, and automotive markets. Included Graphtec Pro Studio and Cutting Master 4 software provide all of the tools needed to create stunning print & cut signage, decals, apparel and more. Utilizing the strength of the Advanced Registration Mark Sensing system (ARMS), and its 600g of down force, even the most challenging medias such as high intensity reflective are cleanly cut.

Graphtec FC8600 series high-performance roll feed cutting plotter is an industry leader for sign makers, graphic artists, and other related users. The FC8600 series features a maximum cutting speed of 58.5 in/sec, 4.0 G maximum acceleration, and 20 to 600 g selectable cutting forces, allowing users to process diamond grade, high-intensity reflective film, sandblast resist rubber, automotive window & paint protection films, self-adhesive vinyl, Amberlith™ and Rubylith™, among other media types. Graphtec FC8600 Cutter Features:

Model FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160
CPU 32-bit CPU
Configuration Grit rolling type
Drive method Digital servo drive
Max. cutting area (W x L) (*1)

2 ft x 164 ft

610 mm x 50 m

2 ft 6 in x 164 ft

762 mm x 50 m

3 ft 6 in x 164 ft

1067 mm x 50 m

4 ft 6 in x 164 ft

1372 mm x 50 m

5 ft 4 in x 164 ft

1626 mm x 50 m

Cutting area of guaranteed accuracy (*2) 23.23 in x 50 ft 29.21 in x 50 ft

41 in x 32 ft,

35.2 in x 50 ft

53 in x 32 ft,

35.2 in x 50 ft

63 in x 32 ft,

35.2 in x 50 ft

Mountable media width

Min. 1.97 in
Max. 30.31 in

Min. 1.97 in
Max. 36.22 in

Min. 1.97 in
Max. 48.19 in

Min. 1.97 in
Max. 60.20 in

Min. 1.97 in
Max. 72.83 in

Max. cross cut width 2 ft 4.9 in (734 mm) 2 ft 10 in (886 mm) 3 ft 10.88 in (1191 mm) 4 ft 10.9 in (1496 mm) 5 ft 8.9 in (1750 mm)
Number of push rollers 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers
Max. cutting speed 4 ft 10.46 in/s (1485 mm/s) at 45° direction
Axial acceleration Max. 39.2 m/s2 (4 G) in 8 steps
Cutting force Max. 5.88 N (600 gf) in 48 steps
Mechanical resolution 0.005 mm
Programmable resolution GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2) Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2) Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character size Approx. 3 mm alphanumeric (varies depending on character font and media)
Mountable number of tools 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade types Supersteel (0.9 mm or 1.5 mm diameter)
Pen types Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3) Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick
Light pointer Built into the tool carriage
Cross-cutter Built into the tool carriage
Perforation cutting Supported (performed by force control)
Registration mark sensing system Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interface USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Buffer memory 2 MB
Command sets GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settings Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
Display Graphic type LCD (3-inch, backlight)
Power source 100 V to 240 V AC, 50 / 60 Hz
Power consumption Max. 160 VA
Operating environment 10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment 16 to 32 °C, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)

Approx. 44" x 28" x 48"

(1120 x 711 x 1219 mm)

Approx. 50" x 28" x 48"

(1270 x 711 x 1219 mm)

Approx. 61.8" x 28" x 48"

(1570 x 715 x 1219 mm)

Approx. 73.6" x 28" x 48"

(1870 x 711 x 1219 mm)

Approx. 84" x 28" x 48"

(2130 x 711 x 1219 mm)

Weight Approx. 38 kgs / 106 lbs
including stand
Approx. 52 kgs / 115 lbs
including stand
Approx. 60 kgs / 133 lbs
including stand
Approx. 68 kgs / 150 lbs
including stand
Approx. 73 kgs / 161 lbs
including stand
Included software (*4) Windows driver, Plotter controller, Graphtec Pro Studio (*5),
Cutting Master 4, Graphtec Studio for Mac
Compatible OS (*4) Windows 10 / 8.1 / 8 / 7
Mac OS 10.7 to 10.12
Compatible Standards UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A
Cutter Model: Graphtec FC8600 Cutter
Contact Us For Pricing



View Details PDF


“Keep your companies projects on time, all the time with A&A Graphics 100% Cutter Uptime Guarantee”

100% Uptime Guarantee—Purchase any plotter from A&A Graphics and keep it under our warranty. If for any reason we are unable to repair the issue in 8 business hours we will do all your printing, copying & scanning for free until the issue is resolved to the manufacturer’s specifications for performance.

The only time a Cutter breaks is when it is needed the most. As a project manager or business owner you can rest a little easier knowing your bids and projects will not be stalled or delayed by Cutter downtime. A&A Graphics employs 5 factory trained specialists offering same day support in most cases in the Greater Houston Area. HP, KIP, OCE, GRAPHTEC, XEROX all current models and legacy Cutters supported. We also have an extensive large wide format Cutter used parts inventory to assist you with any future repairs you may need.
Committed to Value-Added Service and Solid Reputation